Tổng quan
Lưu ý | Đối với vỏ HEAVYCON ADVANCE và HEAVYCON loại B10. Các kết nối cắm chỉ có thể được vận hành khi không có tải/điện áp. |
---|---|
Các đầu nối chỉ có thể được vận hành khi không có tải/điện áp. | |
Phương thức kết nối | Kết nối vít |
Mô-men xoắn siết chặt | 0.5 Nm … 0.8 Nm |
Lưỡi tuốc nơ vít | 0.5 x 3.5 mm |
Số lượng kết nối trên mỗi vị trí | 1 |
Mức độ ô nhiễm | 3 |
Quá điện áp | Loại III |
Số vị thế | 10+PE |
Chu kỳ chèn/rút | ≥ 500 |
Kích thước | B10 |
Liên hệ đánh số | 1 – 10 |
Tiết diện dây dẫn | 0.5 mm² … 2.5 mm² (áp dụng cho dây dẫn bện có ống nối) |
Mặt cắt kết nối AWG | 20 … 14 |
Chiều dài tước của từng dây | 8 mm |
Hướng dẫn lắp ráp | Để đảm bảo sử dụng đúng cách, cần phải lắp đặt trong vỏ có mức bảo vệ IP54 hoặc cao hơn |
Kết nối | Đối với vỏ loại B10. Các đầu nối chỉ có thể được kích hoạt khi không có tải/điện áp. |
Điều kiện môi trường xung quanh
Nhiệt độ môi trường (hoạt động) | -40 °C … 125 °C (bao gồm cả việc làm nóng các tiếp điểm) |
---|
Dữ liệu vật liệu
Vật liệu tiếp xúc | Hợp kim đồng |
---|---|
Vật liệu bề mặt tiếp xúc | Ag |
Kết nối mang vật liệu | PC |
Đặc điểm điện từ
Điện áp định mức (III/3) | 500 V |
---|---|
Điện áp tăng định mức | 6 kV |
Dòng điện định mức | 24 A |
Tiêu chuẩn và quy định
Kết nối trong acc. với tiêu chuẩn | CSA |
---|---|
Quy định về xây dựng và thử nghiệm | DIN EN 61984 |
DIN EN 60664 | |
IEC 60352 | |
Đánh giá khả năng cháy theo UL 94 | V0 |