Bộ chống sét cấp 1+2 có Imax= 100KA, dùng cho nguồn 1 pha, 2 dây ( L, PE, N), dùng trước CB nguồn điện vào nhà máy, tòa nhà, được sử dụng rộng rãi trong các công trình dự án có yêu cầu cao vê chất lượng.
Tài liệu hướng dẫn lắp đặt :
Kích thước
Chiều cao | 95.2 mm |
---|---|
Chiều rộng | 71.2 mm |
Độ sâu | 74.5 mm (incl. DIN rail 7.5 mm) |
Khoảng cách ngang | 4 Div. |
Điều kiện môi trường hoạt động
Mức độ bảo vệ | IP20 (chỉ khi sử dụng tất cả các điểm cuối) |
---|---|
Nhiệt độ môi trường xung quanh (hoạt động) | -40 °C … 80 °C |
Nhiệt độ môi trường xung quanh (bảo quản/vận chuyển) | -40 °C … 80 °C |
Độ cao | ≤ 2000 m (amsl (trên mực nước biển trung bình)) |
Độ ẩm cho phép (hoạt động) | 5 % … 95 % |
Sốc (hoạt động) | 30g (Nửa hình sin / 11 ms / 3x ±X, ±Y, ±Z) |
Độ rung (hoạt động) | 5g (5 – 500 Hz/2.5 h/X, Y, Z) |
Thông số chung
Phân loại thử nghiệm IEC | + I + II |
---|---|
+ I | |
+ T1 + T2 | |
+ T1 | |
Loại EN | + T1 + T2 |
+ T1 | |
Hệ thống cấp nguồn IEC | + TN-S |
+ TT | |
Chế độ bảo vệ | + L-N |
+ L-PE | |
+ N-PE | |
Kiểu lắp | Đường ray DIN: 35 mm |
Màu sắc | + Xám nhạt RAL 7035 |
+ Xám đậm A RAL 7042 | |
Vật liệu vỏ | + PA 6.6-FR 20 % GF |
+ PBT-FR | |
Mức độ ô nhiễm | 2 |
Đánh giá khả năng cháy theo UL 94 | V-0 |
Loại | Mô-đun đường ray DIN, hai phần, có thể chia được |
Số lượng vị trí | 2 |
Thông báo lỗi bảo vệ đột biến | Tiếp điểm chỉ báo quang, từ xa |
Thông số bảo vệ mạch
Điện áp danh định UN | 240 V AC (TN-S) |
---|---|
240 V AC (TT) | |
Tần số danh nghĩa fN | 50 Hz (60 Hz) |
Điện áp liên tục tối đa UC | 350 V AC |
Dòng tải định mức IL | 125 A (< 55 °C) |
Dòng điện dư IPE | ≤ 0.01 mA |
Dòng phóng điện danh nghĩa In (8/20) µs (L-N) | 25 kA |
Dòng phóng điện danh nghĩa In (8/20) µs (L-PE) | 25 kA |
Dòng phóng điện danh nghĩa In (8/20) µs (N-PE) | 100 kA |
Dòng phóng xung (10/350) µs (L-N), điện tích | 12.5 As |
Dòng phóng xung (10/350) µs (L-N), năng lượng riêng | 160 kJ/Ω |
Dòng phóng xung (10/350) µs (L-N), giá trị dòng điện đỉnh Iimp | 25 kA |
Dòng phóng xung (10/350) µs (N-PE), điện tích | 50 As |
Dòng phóng xung (10/350) µs (N-PE), năng lượng riêng | 2500 kJ/Ω |
Dòng phóng xung (10/350) µs (N-PE), giá trị dòng điện đỉnh Iimp | 100 kA |
Tuân theo định mức ngắt hiện tại Ifi (L-N) | 25 kA (264 V AC) |
3 kA (350 V AC) | |
Tuân theo định mức ngắt hiện tại Ifi (N-PE) | 100 A (350 V AC) |
Định mức dòng điện ngắn mạch ISCCR | 25 kA (264 V AC) |
3 kA (350 V AC) | |
Mức bảo vệ điện áp Up (L-N) | ≤ 1.5 kV |
Mức bảo vệ điện áp Up (L-PE) | ≤ 2.2 kV |
Mức bảo vệ điện áp Up (N-PE) | ≤ 1.5 kV |
Cấp bảo vệ điện áp Ures (L-N) | ≤ 1.5 kV (tại In) |
≤ 1.2 kV (ở 10 kA) | |
≤ 1 kV (ở 5 kA) | |
≤ 0.9 kV (ở 3 kA) | |
Điện áp dư Ures (L-PE) | ≤ 2.2 kV (tại In) |
≤ 2 kV (ở 10 kA) | |
≤ 1.8 kV (ở 5 kA) | |
≤ 1.6 kV (ở 3 kA) | |
Điện áp dư Ures (N-PE) | ≤ 1.5 kV (tại In) |
≤ 1 kV (ở 10 kA) | |
≤ 0.9 kV (ở 5 kA) | |
≤ 0.8 kV (ở 3 kA) | |
Hoạt động TOV ở UT (L-N) | 415 V AC (5 giây / chế độ chịu đựng) |
457 V AC (120 phút/chế độ lỗi an toàn) | |
Hoạt động TOV ở UT (N-PE) | 1200 V AC (200 ms / chế độ chịu đựng) |
Thời gian phản hồi tA (L-N) | ≤ 25 ns |
Thời gian phản hồi tA (L-PE) | ≤ 100 ns |
Thời gian phản hồi tA (N-PE) | ≤ 100 ns |
Tối đa cầu chì dự phòng loại V xuyên dây | 125 A (gG) |
Tối đa cầu chì dự phòng có dây nhánh | 315 A (gG) |
Thông số dữ liệu kỹ thuật sung
Dòng xả tối đa Imax (8/20) µs | : 100 kA |
---|
Thông số hiển thị/điều khiển truyền tín hiệu
Chức năng chuyển mạch | Tiếp điểm PDT |
---|---|
Điện áp hoạt động | 12 V AC … 250 V AC |
125 V DC (200 mA DC) | |
Dòng điện hoạt động | 10 mA AC … 1 A AC |
1 A DC (30 V DC) | |
Phương thức kết nối | Kết nối plug-in/vít qua COMBICON |
Ren vít | M2 |
Mô-men xoắn siết chặt | 0.25 Nm |
Chiều dài tước | 7 mm |
Tiết diện dây dẫn linh hoạt | 0.14 mm² … 1.5 mm² |
Tiết diện dây dẫn đặc | 0.14 mm² … 1.5 mm² |
Tiết diện dây dẫn AWG | 28 … 16 |
Thống số kết nối dữ liệu
Phương thức kết nối | Kết nối vít |
---|---|
Ren vít | M5 |
Mô-men xoắn siết chặt | 4.5 Nm |
Chiều dài tước | 18 mm |
Tiết diện dây dẫn linh hoạt | 2.5 mm² … 35 mm² |
Tiết diện dây dẫn đặc | 2.5 mm² … 35 mm² |
Tiết diện dây dẫn AWG | 13 … 2 |
Phương thức kết nối | Lug cáp kiểu nĩa |
Tiết diện dây dẫn linh hoạt | 1.5 mm² … 16 mm² |
Tiêu chuẩn UL về thông số kỹ thuật
Loại SPD | 2CA |
---|---|
Điện áp hoạt động liên tục tối đa MCOV (L-N) | 264 V AC |
Điện áp hoạt động liên tục tối đa MCOV (L-G) | 264 V AC |
Điện áp hoạt động liên tục tối đa MCOV (N-G) | 350 V AC |
Điện áp định danh | 240 V AC |
Dòng tải định mức IL | 50 A |
Chế độ bảo vệ | L-N |
L-G | |
N-G | |
Hệ thống phân phối điện | 1 pha |
Tần số danh định | 50/60 Hz |
Định mức bảo vệ điện áp VPR (L-N) | 1200 V |
Định mức bảo vệ điện áp VPR (L-G) | 1500 V |
Định mức bảo vệ điện áp VPR (N-G) | 1200 V |
Dòng phóng điện danh định In | 20 kA |
Định mức dòng điện ngắn mạch (SCCR) | 50 kA |
Tiêu chuẩn UL về hiển thị/điều khiển truyền tín hiệu
Điện áp hoạt động | 125 V AC |
---|---|
Dòng điện hoạt động | 1 A AC |
Mô-men xoắn siết chặt | 4 lbf-in. |
Tiết diện dây dẫn AWG | 30 … 14 |
Tiêu chuẩn UL về kết nối dữ liệu
Tiết diện dây dẫn AWG | 3 … 2 |
---|---|
Mô-men xoắn siết chặt | 40 lbf-in. |
Tiêu chuẩn và quy định
Tiêu chuẩn/quy định | IEC 61643-11 2011 |
---|---|
EN 61643-11 2012 |