Dữ liệu kỹ thuật | EK1100-0008 |
---|---|
Nhiệm vụ trong hệ thống EtherCAT | ghép nối các Thiết bị đầu cuối EtherCAT (ELxxxx) với các mạng EtherCAT 100BASE-TX |
Phương tiện truyền dữ liệu | Cáp Ethernet/EtherCAT (tối thiểu Cat.5), được bảo vệ |
Khoảng cách giữa các trạm | tối đa 100 m (100BASE-TX) |
Số lượng thiết bị đầu cuối EtherCAT | lên tới 65,534 |
Giao thức | EtherCAT |
Độ trễ | khoảng 1 µs |
Tốc độ truyền dữ liệu | 100 Mbit/s |
Bus interface | 2 x M8, được che chắn, loại vít |
Nguồn điện | 24 V DC (-15 %/+20 %) |
Dòng điện tiêu thụ | 70 mA + (∑ E-bus current/4) |
Tiêu thụ hiện tại từ tải UP | load |
Dòng điện cung cấp E-bus | 2000 mA |
Tiếp điểm nguồn | tối đa 24 V DC/tối đa 10 A |
Cách ly điện | 500 V (tiếp điểm nguồn/điện áp nguồn/Ethernet) |
Nhiệt độ vận hành/bảo quản | -25…+60 °C/-40…+85 °C |
Miễn nhiễm/phát xạ EMC | tuân theo EN 61000-6-2/EN 61000-6-4 |
Độ ẩm tương đối | 95 %, không ngưng tụ |
Khả năng chống rung/sốc | tuân theo EN 60068-2-6/EN 60068-2-27 |
Bảo vệ. vị trí đánh giá/cài đặt | IP20/biến |
Phê duyệt/dấu hiệu | CE, UL, ATEX, IECEx |
Ex marking | ATEX: II 3 G Ex nA IIC T4 Gc Ex nA IIC T4 Gc Ex tc IIIC T135 °C Dc IECEx: Ex ec IIC T4 Gc |
Dữ liệu kết cấu | EK-44-8pin |
---|---|
Thiết kế | dạng vỏ thiết bị đầu cuối nhỏ gọn với đèn LED tín hiệu |
Chất liệu | polycarbonate |
Kích thước (Rộng x Cao x Sâu) | 44 mm x 100 mm x 68 mm |
Lắp đặt | trên thanh ray DIN 35 mm, tuân theo EN 60715 có khóa |
Gắn cạnh nhau | bằng khe đôi và kết nối chính |
Đánh dấu | ghi nhãn của sê-ri BZxxx |
Wiring | Đi dây dẫn rắn (e), dây dẫn mềm (f) và măng xông (a): truyền động lò xo bằng tuốc nơ vít |
Tiết diện kết nối | s*: 0.08…2.5 mm², st*: 0.08…2.5 mm², f*: 0.14…1.5 mm² |
Mặt cắt ngang kết nối AWG | s*: AWG 28…14, st*: AWG 28…14, f*: AWG 26…16 |
Chiều dài | 8…9 mm |
Tiếp điểm nguồn tải hiện tại | Imax: 10 A |